Refurbishment

Repair of old coatings

KEBUTYL systems

Dry surfaces

Coating systems for underground pipes complying with EN 12068 and ISO 21809-3 standards

available without solvents

easy installation on accessible pipes

high adhesion


COMPOSITION


Primer KEBUTYL: butyl rubber solution in solvent or aqueous base


KEBULEN 3-ply tape: tape composed of a PE film covered on both sides by coextrusion of butyl rubber


KEBULEN B or O tape: tape composed of a PE film covered on one side by coextrusion of butyl rubber


PRINCIPLE OF IMPLEMENTATION

Removal of the old non-adherent coating

Primer application

Application of the anti-corrosion tape

Application of the mechanical protection tape

KEBU GW and BBS tapes

Repair of bituminous coatings

Tapes for the repair of bituminous coatings in accordance with EN 12068

KEBU GW and BBS bituminous strips are 4 mm thick strips which are applied by means of a burner for spot repairs on pipes coated with old bituminous coatings which are still adherent.

Petrolatum TEDO and KEBU systems

All surfaces

Coating systems for underground pipes complying with EN 12068 and ISO 21809-3 standards

+ without solvents

+ minimal surface preparation

+ easy to implement

+ applicable in all temperatures and humidity


COMPOSITION


Primer: Vaseline-based paste, solvent-free, applicable by hand or brush


Petrolatum tape: anti-corrosion tape based on petroleum jelly, applied by hand


Mechanical protection: tape based on butyl rubber and polyethylene




PRINCIPLES OF IMPLEMENTATION

Removal of the old non-adherent coating

Primer application

Application of the anti-corrosion tape

Application of the mechanical protection tape

TEDOWRAP tape

On existing coatings

Reinforcement and repair of existing PE or bitumen coatings

The TEDOWRAP tape is composed of a stabilized PE support covered with an elastomer coating with high adhesive power. The thickness of the adhesive (1 to 1.5 mm) ensures penetration into surface irregularities.


Suitable for old coatings that are still adherent or partially detached, provided that the steel surface is in good condition.


The application of the TEDOWRAP strip significantly increases the mechanical resistance of the coating in place.

Share by: